WhatsApp Free Audit

Mold Remediation Licensing Laws by State: 2026 License Guide

Mold remediation licensing laws by state differ enough that a restoration company operating in more than one state cannot assume the same rules, thresholds, or credentials apply everywhere. Some states require a license for mold work. Some set the trigger by square footage, one sets it by job value, and many states have no dedicated mold license at all. Getting this wrong in marketing or in actual practice creates real legal and trust problems.

Do Mold Remediation Companies Need to Be Licensed?

It depends on the state. Texas, Florida, New York and Louisiana require a state license for mold remediation work above a set size or value. Many other states, including California, Georgia and Ohio, have no state-specific mold license. In those states, IICRC certification is the main credential homeowners can check. Before you bid on a job or run ads in a new state, confirm the current rules with that state’s licensing agency.

Mold Remediation License Requirements: State Comparison

StateMold license required?When it appliesCan the same company assess and remediate one job?
TexasYes, from TDLR (separate assessor and remediator licenses)Mold areas of 25 contiguous square feet or moreNo
FloridaYes, under the Mold-Related Services ActMold areas of 10 square feet or moreNo. An assessor cannot remediate a property they assessed in the previous 12 months
New YorkYes, under Labor Law Article 32 (NYS Department of Labor)Mold areas over 10 square feetNo
LouisianaYes, a mold remediation license from the Louisiana State Licensing Board for ContractorsJobs valued over $7,500Check with the board
California, Georgia, OhioNo state mold licenseN/ANo state rule; IICRC certification is the main credential

Licensing rules change. Always check the state agency’s current requirements before you take a job.

The Three Things That Actually Vary State to State

1. Whether a state licenses mold work at all. Only a handful of states require a dedicated mold assessment or remediation license. Many, including California, Georgia, and Ohio, have no state-specific mold license, which means IICRC certification (S500 for water damage, S520 for mold) becomes the primary credential homeowners can actually verify.

2. The size or value that triggers licensing. In states that do require licensing, the trigger isn’t consistent. Texas requires a TDLR-licensed Mold Assessor or Remediator for jobs of 25 contiguous square feet or more. Florida and New York both set the bar lower, at 10 square feet, which means far more jobs legally require a licensed professional in those states than in Texas. Louisiana uses job value instead: a license is required when the project is worth more than $7,500.

3. How strictly assessment and remediation are separated. This is the detail most out-of-state restoration companies get wrong. In Texas, a license holder may not perform both mold assessment and mold remediation on the same project, and one owner cannot have an interest in both the assessment company and the remediation company on that project. Florida’s Mold-Related Services Act goes further in time: a licensed assessor cannot remediate any property they assessed within the previous 12 months. New York’s Article 32, enforced by the state’s Department of Labor rather than a licensing board, also bars the same company from doing both on one project.

mold remediation licensing laws by state

Why the Assessor/Remediator Split Matters So Much

For a restoration company used to operating in a state with no mold license, where one company handles the full job, expanding into Texas, Florida or New York without accounting for the assessor/remediator split creates a real compliance problem, not just a marketing inconsistency. Companies in those states typically need to structure around referral relationships, either partnering with a separate licensed assessor or explicitly marketing as “assessment only” or “remediation only,” rather than a single “we do it all” offering.

The split exists for a specific reason: a company that is paid to find mold during an assessment has an obvious reason to inflate the scope of the remediation work it then sells itself. New York’s Article 32, which took effect in 2016, was a direct response to improper mold work uncovered after Superstorm Sandy.

What This Means for Marketing and Operations

1. Don’t assume your home-state licensing model transfers. A restoration company built in a no-license state needs a different operational and marketing structure to expand into Texas, Florida or New York, not just updated ad copy. A license from one state also does not carry over to another.

2. In states with a low square-footage threshold, more jobs require licensing than you might expect. A 10-square-foot threshold, as in Florida and New York, catches far more residential jobs than a 25-square-foot threshold does. Campaigns and intake processes in those states should assume licensing applies more often, not less.

3. In states with no dedicated mold license, lead with IICRC certification. Where there’s no state-specific credential to reference, IICRC certification is the verifiable standard homeowners can actually check, and it should be featured prominently in ad copy and on service pages.

4. In split-requirement states, be explicit about which role you’re marketing. A landing page that doesn’t clarify whether you’re offering assessment or remediation, in a state that legally requires them to be separate, creates confusion at exactly the point a homeowner is deciding whether to call.

Running ads for mold jobs? See our guide to Google Ads for mold remediation.

FAQ

Do you need a license for mold remediation?

Only in some states. Texas, Florida, New York and Louisiana require a state license above a set size or job value. States including California, Georgia, and Ohio have no dedicated state mold license and rely on IICRC certification as the main verifiable credential.

Do you need a mold remediation license in Florida?

Yes, for mold areas of 10 square feet or more. Florida licenses mold assessors and mold remediators separately under the Mold-Related Services Act, and an assessor cannot remediate a property they assessed in the previous 12 months.

Do you need a mold remediation license in Texas?

Yes, for mold areas of 25 contiguous square feet or more. Licenses are issued by the Texas Department of Licensing and Regulation (TDLR), and the same license holder cannot both assess and remediate the same project.

Why do some states require separate companies for assessment and remediation?

To prevent a conflict of interest. A company paid to find mold during an assessment has an obvious reason to inflate the remediation work it then sells. New York’s law was enacted in response to abuses uncovered after Superstorm Sandy.

What size job requires a mold license in states that have one?

It varies. Texas sets the threshold at 25 contiguous square feet, while Florida and New York set it lower, at 10 square feet. Louisiana uses job value instead, requiring a license for jobs over $7,500.

Can a Texas-licensed mold remediation company work in Florida?

Not on a Texas license. Florida requires its own state license, and it applies to smaller jobs (10 square feet instead of 25). Both states separate assessment from remediation, and Florida adds a 12-month waiting period before an assessor can remediate a property it assessed.

For a closer look at how mold licensing shapes campaign strategy in specific states, see our guides for Texas Water Damage Google Ads, Florida Water Damage Google Ads, and New York Water Damage Google Ads.

EZE Grow runs Google Ads for water damage restoration, HVAC and plumbing companies across the US. Book your free audit →

Leave a Comment